HP Designjet 4500

8-210
Removal and Installation
HP Designjet 4500 Printer Series Service Manual
Roll 2 Media Feed Motor
Removal
Switch off the product and remove the power cable.
1. Remove the Roll 2 Drawer
⇒ Page 8-186
2. Remove one T15 screw (Type F) that
secures the Roll 2 Media Feed Motor
Cover from the left side.
3. Push up the Roll 2 Feed Roller Plate.
4. Remove one T15 screw (Type F) that
secures the Roll 2 Media Feed Motor
Cover from below.