HP Designjet 4500

8-222
Removal and Installation
HP Designjet 4500 Printer Series Service Manual
Roll 2 Left Spindle Support
Removal
Switch off the product and remove the power cable.
1. Remove the Roll 2 Left Drawer Cover
⇒
Page 8-179.
2. Remove the Roll 2 Bar ⇒ Page 8-179
3. Remove the Roll 2 Drawer ⇒ Page 8-179
4. Remove three screws (Type A) that secure
the Left Spindle Support from the Roll 2
Drawer.
5. Remove the Left Spindle Support