2-40
System Error Codes
HP Designjet 4500 Printer Series Service Manual
Remove any paper from inside the Stacker
Check for paper jams in the paper path.
Check the Door Switch Sensor is not damaged or jammed with paper.
Replace the Door Switch ⇒ Page 8-258.
System Error:
38.0:10
Problem
Description:
Buffer sensor not activated
Corrective Action:
Try the following:
Check the Buffer Sensor is not damaged.
Replace the buffer sensor.
System Error:
38.A:10
Problem
Description:
Stacker presence sensor failure
Corrective Action:
Try the following:
Check the Stacker Presence Sensor is not damaged.
Replace the Stacker Presence Sensor ⇒ Page 8-102.
System Error:
81.3:10
Problem
Description:
Stacker motor failure
Corrective Action:
Try the following:
Check there is nothing blocking the motor
Check that the motor is correctly installed and all cables are connected
correctly.
Replace the Stacker Motor ⇒ Page 8-256.
To Next Page
Loading...
