9. Important: Press the media wind button on the take-up reel panel
indicated below to wind the printing material once around the core.
10. Press the ↓ button on the front panel again to advance some more
printing material: enough to enable you to insert the media weight.
It is important that the media weight is the same width as the printing
material you are using. By matching color coded lengths of plastic
tube, you can make a media weight for different widths of standard
paper sizes.
file:///C|/Documents%20and%20Settings/---/Desktop/HP/html/p0033.htm (5 of 7) [8/5/2002 2:38:29 PM]
To Next Page
Loading...