Severe error codes
Severe error messages inform you of a device failure. Some of these messages can be cleared by
pressing the Power button to turn off the printer, and then pressing it again to turn the printer back on. If
a severe error persists, service is required.
System error Component/System
01.1:10 Main PCA (MPCA) failure
01.1:19 Incorrect Main PCA installed
01.3:10 Bundle Board failure
02:10 Carriage Board Failure
03.1:10 Battery of Real-Time Clock ran down
08:10 Front Panel does not respond
21:10 Service Station (SS) failure
21.1:10 Pump motor failure
26:10 Ink system failure
27:10 Generic printhead error
41:10 Paper servo error
41.1:10 Right Rear Gear Train (picking motor) failure
41.2:10 Paper/Feed motor failure
42:10 Carriage servo error
42.1:10 Carriage motor failure
45:10 Rewinder motor failure
51:10 Top Cover sensor failure
51.1:10 Ink Cartridge Cover Sensor failure
53.1:10 OOP sensor failure
53.2:10 Output Tray sensor failure
55:10 Line Sensor failure
59.1:19 S/N Mismatch
59.2:19 An unsupported or reused NVM has been installed
79:03 Generic printer error (NVM reseated)
79:04 Generic printer error (FW assert)
85.1:10 Feed Index Sensor failure
85.2:10 Feed Encoder Sensor failure
87:10 Encoder Strip failure
ENWW
System error codes
41
To Next Page
Loading...