If the edge of the roll is not straight or torn (sometimes due to tape used to
hold end of the roll), pull the paper slightly and cut a straight edge.
Insert the edge of the paper into the printer.
WARNING! Do not push your fingers inside the printer's paper path.
Roll the paper into the printer until you feel resistance and the paper flexes
slightly. When the printer detects the paper, it beeps, and feeds in the paper
automatically.
The front panel prompts you to select the paper category and type.
If you do not see your paper type in the front panel, tap “More paper types.”
Page 6 of 14
To Next Page
Loading...