7. Press the Margins/Layout button and select a layout option.
If the job is 10 mm smaller in both dimensions than the page size you have chosen, select Standard
margins. See
Select margins options on page 81.
If the job is the same size as the page you have chosen, but has at least 5 mm of white space around the
edges, select Clip contents by margins.
If the job is the same size as the page you have chosen, and does not have 5 mm of white space around
the edges, select Oversize. The final output will be larger than the page you selected, but you can cut
the print to the correct size without losing any of it.
8. Select the Features tab, then select the Autorotate option and the Crop lines option. Autorotation can
help to avoid wasting paper, and the crop lines will show you where to cut the paper after printing.
124 Chapter 13 Practical printing examples ENWW
To Next Page
Loading...