You can find your printer's IP address by selecting the Connectivity menu icon , then Gigabit Ethernet or
Jetdirect EIO, then View configuration.
If you have followed these instructions but failed to get through to the Embedded Web Server, see
Cannot
access the Embedded Web Server on page 165.
Change the language of the HP Utility
The HP Utility can work in the following languages: English, Portuguese, Spanish, Catalan (Windows only),
French, Italian, German, Russian, Simplified Chinese, Traditional Chinese, Korean and Japanese.
●
Under Windows, select Tools > Set Language and select a language from the list.
●
Under Mac OS, the language is changed as for any other application. In System Preferences, select
International and re-launch the application.
Change the language of the Embedded Web Server
The Embedded Web Server can work in the following languages: English, Portuguese, Spanish, Catalan,
French, Italian, German, Russian, Simplified Chinese, Traditional Chinese, Korean and Japanese. It uses
whichever language you have specified in your Web browser's options. If you have specified a language that
it cannot support, it works in English.
To change the language, you must change your Web browser's language setting. For example, in Internet
Explorer version 6, go to the Tools menu and select Internet Options, Languages. Then ensure that the
language you want is at the top of the list in the dialog box.
Change the sleep mode setting
If the printer is left switched on but unused for a certain period of time, it goes automatically into sleep mode
to save power. To change the time the printer waits before it goes into sleep mode, go to the front panel and
select the Setup menu icon
, then Front panel options > Sleep mode wait time. Highlight the wait time
you want and then press the OK key. You can set the time from 1 to 240 minutes. The default time is 30
minutes.
Turn the buzzer on and off
To turn the printer's buzzer on or off, go to the front panel and select the Setup menu icon , then Front
panel options > Enable buzzer, and highlight on or off and press the OK key. By default, the buzzer is set to
on.
Change the front-panel display contrast
To change the contrast of the front-panel display, select the Setup menu icon , then Front panel options
> Select display contrast, and enter a value using the Up or Down key. Press the OK key to set the value. The
default contrast is set to 50.
Change the units of measurement
To change the units of measurement in the front-panel display, select the Setup menu icon , then Front
panel options > Select units, and select English or Metric. By default the units are set to metric.
ENWW Change the language of the HP Utility 21
To Next Page
Loading...