Perform an EEROM Reset as follows:
1. In the Service Tests submenu, scroll to EEROM Reset and press OK.
2. The front panel advises you that all user information/files will be removed. Press OK to reset the
EEROM or Cancel to exit.
3. While the EEROM is being reset, the front panel displays the following message.
4. When the EEROM has been reset, the front panel displays the following message. Press OK to
shut down the printer.
Hard Disk recovery
This option is a utility that is also available from the Service Utilities menu. See Hard Disk recovery
on page 120.
File system check
This option is a utility that is also available from the Service Utilities menu. See File system check
on page 120.
OMAS Module test
The purpose of this test is to check the operation of the Optical Paper Advance Sensor (OMAS) system.
In the Service Tests submenu, scroll to OMAS Test and press OK.
ENWW
Entering the Service Tests menu
107
To Next Page
Loading...