NOTE: When the message is displayed on the front panel, a ‘silent’ warning message is added
within the system error log ‘8:01’. This helps when reviewing the error log history, to see if the message
has been displayed.
Cleaning procedure
1. At the front panel, select Clean Encoder Strip from the Ink menu.
2. The front panel explains what you need to clean the Encoder Strip. Press OK to continue or Cancel
to exit.
3. Open the Window.
4. Clean the Encoder Strip as shown in the front panel, and press OK when finished.
5. Close the Window. The Carriage moves to the left-hand side of the printer.
468 Chapter 11 Preventive maintenance ENWW
To Next Page
Loading...