6. The front panel prompts you to reopen the Window and clean the right-hand side of the encoder
strip (inside the Service Station). Press OK when finished.
7. Close the Window. The Carriage returns to its ready position in the Service Station.
Clean the Paper-advance Sensor window
The paper advance sensor is the very small rectangular window (less than 1 square centimeter in size
and shown in the following graphic) near the sixth platen roller from the right.
Use a clean, absorbent, lint-free cloth that you have slightly dampened with isopropyl alcohol to very
gently wipe any dust and loosened ink deposits from the sensor window.
Apply oil to the Overdrive
Occasionally, it may be necessary to oil the Overdrive in order to stop the rollers from squeaking:
1. Open the Window.
2. There are small holes in the Center Platen beside some of the rollers.
ENWW
Clean the Paper-advance Sensor window
469
To Next Page
Loading...