System Error Codes are displayed directly on the front panel (but can also be seen on the
Information Page) and have been defined in the format XX.YZ. or XX.n:YZ.m.
●
XX: Service Part (2 digits).
●
n: Service Part Index (if more than one used in the product) - Optional.
◦
e.g. Identify the Ink Supply (color and number).
●
Y: Who should perform the action (1 digit) - (User or Service Engineer).
●
Z: Action to perform (1 digit).
●
m: additional actions/information to consider (1 digit) - Optional.
◦
e.g. Non-authorized ink was detected, PM was triggered or Printhead in/out of Warranty.
The following table explains the XX part of the System Error Code or Warning:
Code Component/System
01.0 Main PCA
01.1 Printmech PCA
01.2 ISS Top PCA
01.3 ISS Bottom PCA
02.1 Carriage PCA
03 Power Supply Unit
05 Formatter
05.1 Formatter Fan
06 Hard Disk Drive
08 Front Panel
11 Trailing Cable
17 Other cables
21 Service Station
23 Air Pressure System (APS)
24 Ink Supply Tubes
26.n Ink Cartridge (color n)
27.n, 28.n Printhead (color n)
29 Maintenance Cartridge
41 Media-Axis Motor
42 Scan-Axis Motor
43 Vacuum Fan
44 Aerosol Fan
45 Rewinder
46 Primer
ENWW
Explanation of system error codes and warnings
43
To Next Page
Loading...