8. Check that Ramps are broken are not broken and are aligned.
9. Report root cause in cso and change Stacker.
Stacker capacity lower than expected
Stacker capacity is defined as up to 50 pages (T920/T1500/T2500), and 100 pages (T3500), A1/D size line
drawing plots in landscape on bond media, but stacker capacity depends on media thickness and page size. If
you are printing plots shorter than A1 and you experience a reduction in the stacker capacity because they
collapse and the curling fills the available stacking space:
●
Try to increase the length of the plots when printing A2 and A3 sizes:
56 Chapter 2 Troubleshooting ENWW
To Next Page
Loading...
