HP Designjet T920

●
SE 93.1.0:10
●
SE 93.1.1:10
●
SE 93.1.2:10
●
SE 93.3.0:10
●
SE 93.3.1:10
●
SE 93.3.2:10
Root Cause
●
Service Station Side Ink Supply Station than manages 3 ink tubes (Gray/Photo black /Matte
black) is failing, therefore, those tubes are not completely filled.
Corrective action
●
Replace Service Station Side Ink supply Station
●
Also, ensure that the ink tube connectors are properly lubricated.
●
Run a tube purge to fill all the tubes.
To purge the tubes, first remove all supplies (ink and printhead). Then run “Purge tubes”
from the service utilities. Re-insert the inks and printhead, as requested.
e. Service plot shows the following SE:
●
SE 93.1.3:10
●
SE 93.1.4:10
●
SE 93.1.5:10
●
SE 93.3.3:10
●
SE 93.3.4:10
●
SE 93.3.5:10
Root Cause
●
Front Panel Side Ink Supply Station than manages 3 ink tubes(Cyan/Magenta/Yellow)is
failing, therefore, those tubes are not completely filled.
Corrective action
●
Replace Front Panel Side Ink supply Station
●
Also, ensure that the ink tube connectors are properly lubricated.
●
Run a tube purge to fill all the tubes.
To purge the tubes, first remove all supplies (ink and printhead). Then run “Purge tubes”
from the service utilities. Re-insert the inks and printhead, as requested.
f. Service plot shows one or several 93.x.n:10 SE:
ENWW Ink supply problems 71