HP Designjet Z3100 series Reference Guide

2. Insert the sheet into the feeder. Load your sheet aligned with the load
line and insert until the paper will not continue, with thicker sheets you
feel resistance. The printer detects the sheet in three seconds. A
countdown begins on the front-panel display.
WARNING! Take care not to push your fingers inside the
printer's paper path, the results may be painful.
3. After the countdown, the paper feeds into the printer. Guide the sheet
into the printer; this is especially important with thicker papers.
4. The front-panel display asks if you are loading a roll or a sheet.
Select Sheet with the Up and Down keys.
22 Chapter 3 Paper handling ENWW
Paper handling

HP Designjet Z3100 series Specifications

General

Print Technology	Thermal Inkjet
Maximum Print Resolution	2400 x 1200 optimized dpi
Number of Inks	12
Ink Types	Pigment-based
Hard Disk	40 GB
Operating Systems Supported	Windows, macOS
Connectivity	USB 2.0, Ethernet
Media Handling	Roll feed
Print Languages	HP-GL/2, HP-RTL, CALS G4
Line Accuracy	+/- 0.1%
Dimensions (W x D x H)	1770 x 1047 mm
Media Sizes Supported	Up to 44 inches wide (roll), up to 42 x 60 inches (sheet)
Print Margin (roll)	5 mm (top), 5 mm (right), 5 mm (left), 5 mm (bottom)