HP Designjet Z3100 series Reference Guide

6. The printer checks the alignment and measures the sheet.
NOTE Depending on the length of the sheet, it feeds out the
front of the printer.
7. If the paper has been loaded successfully, the front panel displays
the Ready message and the printer ready to print. If the paper is not
straight, follow the instructions on the front-panel display.
NOTE When correctly loaded, the sheet is in the back of the printer.
NOTE If you have an unexpected problem at any stage of the paper
loading process, see Using your printer on DVD.
Paper menu procedure
As an alternative you can use the paper menu to start the paper loading
process
1. Perform step one of the easy loading procedure.
24 Chapter 3 Paper handling ENWW
Paper handling

HP Designjet Z3100 series Specifications

General

Print Technology	Thermal Inkjet
Maximum Print Resolution	2400 x 1200 optimized dpi
Number of Inks	12
Ink Types	Pigment-based
Hard Disk	40 GB
Operating Systems Supported	Windows, macOS
Connectivity	USB 2.0, Ethernet
Media Handling	Roll feed
Print Languages	HP-GL/2, HP-RTL, CALS G4
Line Accuracy	+/- 0.1%
Dimensions (W x D x H)	1770 x 1047 mm
Media Sizes Supported	Up to 44 inches wide (roll), up to 42 x 60 inches (sheet)
Print Margin (roll)	5 mm (top), 5 mm (right), 5 mm (left), 5 mm (bottom)