HP Designjet Z3100 series User Manual

To print any internal print, press the Menu key to return to the main menu, select the Internal Prints
menu icon
, then select the internal print you want. The following internal prints are available.
●
Menu map: shows details of all the front-panel display menus
●
Configuration: shows all the current front-panel display settings
●
Usage report: shows estimates of the total number of prints, number of prints by paper type, number
of prints by print-quality option, and total amount of ink used per color (the accuracy of these
estimates is not guaranteed)
●
HP-GL/2 palette: shows the color or grayscale definitions in the currently selected color palette,
requires the HP-GL/2 Upgrade
●
Service information: provides information needed by service engineers
8 Chapter 1 Introduction ENWW
Introduction

HP Designjet Z3100 series Specifications

General

Print Technology	Thermal Inkjet
Maximum Print Resolution	2400 x 1200 optimized dpi
Number of Inks	12
Ink Types	Pigment-based
Hard Disk	40 GB
Operating Systems Supported	Windows, macOS
Connectivity	USB 2.0, Ethernet
Media Handling	Roll feed
Print Languages	HP-GL/2, HP-RTL, CALS G4
Line Accuracy	+/- 0.1%
Dimensions (W x D x H)	1770 x 1047 mm
Media Sizes Supported	Up to 44 inches wide (roll), up to 42 x 60 inches (sheet)
Print Margin (roll)	5 mm (top), 5 mm (right), 5 mm (left), 5 mm (bottom)