●
Gamma: Because computer displays are illuminated, images displayed on computers tend
to look more luminous than when printed. Increasing the Gamma from the default of 1.0 can
compensate for this. Usually, a setting 1.1 to 1.2 is adequate.
8. Click the Printer Settings button.
●
Printer: select the printer (for example, HP Designjet Z3100 24in Photo).
●
Select Paper Type/Quality from the drop-down menu, then select the Paper tab.
●
Paper Type: select the paper type that is currently loaded into the printer.
●
Quality Options: select Standard and drag the slider to Quality.
●
Select the Color tab.
●
Select Print in Color.
ENWW Color management scenarios 75
Color management
To Next Page
Loading...
