3 Paper handling
Load a roll onto the spindle
CAUTION: Ensure the sheet tray is closed.
1. Remove the right-hand end of the spindle from the printer, then the other end.
WARNING! Do not insert your fingers into the spindle supports during the
removal process.
2. The spindle has a stop at each end to keep the roll in position. The blue stop
can be removed to mount a new roll; it slides along the spindle to hold rolls of
different widths. Remove the blue paper stop from the end of the spindle.
8 Chapter 3 Paper handling ENWW
Paper handling
To Next Page
Loading...