Paper menu procedure
As an alternative you can use the paper menu to start the paper loading process.
1. Follow steps one through five of the
Easy loading procedure on page 10.
2. Press the Menu key to return to the main menu, select the Paper menu icon
.
3. Select Paper load.
4. Select Load roll.
5. Continue with step 9 of the easy loading process (see Select your paper
category and type. on page 12).
Unload a roll
Before unloading a roll, check whether there is paper on the roll or whether the end
of the paper is no longer attached to the roll, and follow the appropriate procedure
as described below.
TIP: Do not touch the paper while the printer is printing, as this can cause print
quality defects.
Unload paper key procedure with paper on the roll
If there is paper on the roll, use the following procedure.
1. Press the Unload paper key on the front panel.
2. When prompted by the front-panel display, lift the blue lever on the left.
3. When prompted by the front-panel display, lightly rewind the paper from the
end of the spindle until removed from the printer.
4. When prompted by the front-panel display, lower the blue lever.
ENWW
Unload a roll
13
Paper handling
To Next Page
Loading...