HP Designjet Z3200 Series - Page 58

declares that the product
Product name and model: HP Designjet Z3100/Z3200/Z2100 Photo printer series
HP Designjet T1100 printer series
HP Designjet T610 printer series
Regulatory Model Number
(1)
: BCLAA-0608
Product options: All
conforms to the following product specifications
Safety: IEC 60950-1:2001 / EN 60950-1:2001
CAN/CSA 60950-1-07 / UL 60950-1-2007
EMC: CISPR 22:2005 / EN 55022:2006 Class B
EN 55024:1998+A1:2001+A2:2003
EN 61000-3-2:2000 +A2:2005 / IEC 61000-3-2:2000 +A1:2001
+A2:2004
EN 61000-3-3:1995+A1:2001 / IEC 61000-3-3:1994 +A1:2001
FCC Title 47 CFR, Part 15 Class B
Additional information
The product herewith complies with the requirements of the Low-Voltage Directive
2006/95/EC and the EMC Directive 2004/108/EC, and carries the CE marking
accordingly. In addition, it complies with the WEEE Directive 2002/96/EC and RoHS
Directive 2002/95/EC.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
●
This device may not cause harmful interference.
●
This device must accept any interference received, including interference that
may cause undesired operation.
Notes:
1. The product is assigned a Regulatory Model Number which stays with the
regulatory aspect of the design. The Regulatory Model Number is the main product
identifier in the regulatory documentation and test reports; this number should not
be confused with the marketing name or the product numbers.
54
Chapter 12 Legal information
ENWW
Legal information