3. Insert the ink cartridge into its slot.
4. Push the cartridge into the slot until it snaps into position. You should hear a beep and see confirmation
that the cartridge has been inserted.
If you have difficulty, see Cannot insert an ink cartridge on page 145.
5. When all cartridges have been inserted, close the cover.
6. The front-panel display confirms that all cartridges have been correctly inserted.
About the printheads
The printheads are connected to the ink cartridges and jet ink onto the paper.
CAUTION: Observe precautions when handling printheads because they are ESD-sensitive devices (see the
Glossary on page 168). Avoid touching pins, leads and circuitry.
ENWW About the printheads 99
To Next Page
Loading...
