5. Remove any debris blocking the printhead drop detector.
6. With a dry, lint-free cloth, wipe the surface of the drop detector to remove any non-visible debris.
7. Close the window.
8. Plug in and switch on the printer.
9. Power the printer on at the front panel.
Align the printheads
Precise alignment between printheads is essential for accurate colors, smooth color transitions and sharp
edges in graphical elements. Your printer has an automatic printhead alignment process which runs
whenever a printhead has been accessed or replaced.
In cases where the paper has jammed or you are experiencing problems with color accuracy, see
Color
management on page 72; you may need to align the printheads.
148 Chapter 18 Troubleshooting ink cartridge and printhead issues ENWW
To Next Page
Loading...
