3. Open the DVD icon on your desktop.
4. When the Z5400 window appears on your screen, click Software and then Install.
5. Your Web browser opens to display the rest of the software installation procedure. You must select
Windows or Mac OS X software, and choose which specific software you want to install (by default, all of
it).
6. When the software has been installed, the HP Printer Setup Assistant starts automatically, to set up a
connection to your printer. Follow the instructions on your screen.
7. When you reach the Select Printer screen, look for your printer's mDNS service name (which you noted
in step 1) in the Printer Name column.
●
If you find the right name, scroll sideways if necessary to see the Connection Type column, and
check that it shows Bonjour. Then highlight that line. Otherwise, continue searching further down
the list.
●
If you cannot find your printer's name with a Bonjour connection type, check the box My printer is
not in the list.
Click Continue.
8. Continue following the instructions on the screen. When you reach the Printer Queue Created screen,
click Quit to exit, or Create New Queue if you want to connect another printer to the network.
9. When the HP Printer Setup Assistant has finished, you can remove the DVD from the DVD drive.
If the printer driver is already installed, the HP Printer Setup Assistant can be run at any time from the DVD.
TCP/IP connection
1. Go to the front panel and make a note of the printer's URL (see Access the Embedded Web Server
on page 29).
2. Insert the HP Start-up Kit DVD into your DVD drive.
3. Open the DVD icon on your desktop.
4. When the Z5400 window appears on your screen, click Software and then Install.
5. Your Web browser opens to display the rest of the software installation procedure. You must select
Windows or Mac OS X software, and choose which specific software you want to install (by default, all of
it).
6. When the software has been installed, the HP Printer Setup Assistant starts automatically, to set up a
connection to your printer. Follow the instructions on your screen.
7. When you reach the Select Printer screen, look for your printer's URL (which you noted in step 1) in the
Printer Name column.
●
If you find the right name, scroll sideways if necessary to see the Connection Type column, and
check that it shows IP Printing. Then highlight that line. Otherwise, continue searching further
down the list.
●
If you cannot find your printer's name with an IP Printing connection type, check the box My
printer is not in the list.
Click Continue.
8. Continue following the instructions on the screen. When you reach the Printer Queue Created screen,
click Quit to exit, or Create New Queue if you want to connect another printer to the network.
9. When the HP Printer Setup Assistant has finished, you can remove the DVD from the DVD drive.
ENWW Connect a computer to the printer by network (Mac OS X) 17
To Next Page
Loading...
