●
In the Windows driver dialog: select the Features tab, then Crop lines.
●
In the Mac OS X Print dialog: select the Finishing panel, then Crop lines.
●
On the Embedded Web Server's Submit Job page: select Advanced settings > Roll options > Enable
crop lines > Yes.
Alternatively, you can choose to print crop lines with all jobs by default:
●
In the Embedded Web Server: select Setup > Printer settings > Job management > Use crop lines
when printing > On.
●
Using the front panel: press
, then , then Setup > Printing preferences > Paper > Enable
crop lines > On.
To print crop lines with nested jobs (see
Nest jobs to save roll paper on page 60), you must select a
different option:
●
In the Embedded Web Server: select Setup > Printer settings > Job management > Use crop lines
when nest is enabled > On.
●
Using the front panel: press
, then , then Setup > Job management > Nest options > Enable
crop lines > On.
Use paper economically
Here are some recommendations for making economical use of paper:
●
If you are printing relatively small images or document pages, you can use nesting to print them side by
side instead of one after another. See
Nest jobs to save roll paper on page 60.
●
You may be able to save some roll paper by using the following options:
◦
In the Windows driver dialog: select the Features tab and then Remove top/bottom blank areas
and/or Rotate by 90 degrees or Autorotate.
◦
In the Mac OS X Print dialog: select the Finishing panel, then Remove Top/Bottom Blank Areas
and/or Rotate by 90 degrees.
◦
On the Embedded Web Server's Submit Job page: select Advanced settings > Roll options >
Remove top/bottom blank areas and/or Rotate.
●
If you check the print preview on your computer before printing, you can sometimes avoid wasting
paper on prints containing obvious mistakes. See
Preview a print on page 57.
Nest jobs to save roll paper
Nesting means automatically printing images or document pages side by side on the paper, rather than one
after the other. This is done to avoid wasting paper.
60 Chapter 7 Printing ENWW
To Next Page
Loading...
