The printer driver provides different adjustment facilities depending on whether you are printing in color or in
grayscale.
Printing in color
You can adjust the colors of your print under Windows:
●
In the Windows driver dialog: select the Color tab, ensure that the Advanced color adjustments box is
checked, then press the Settings button beside it.
You can then make adjustments using a lightness slider and three color sliders.
●
The lightness slider simply makes the whole print lighter or darker.
●
The color sliders can be used to fade or emphasize each of the primary colors in the print. The primary
colors may be red, green and blue; or cyan, magenta and yellow; depending on the color model used in
the image.
The Reset button restores each slider to its default central position.
Printing in grayscale
You can convert all colors in your image to shades of gray in the following ways:
●
In your application program: many programs provide this option.
●
In the Windows driver dialog: go to the Color tab and look at the Color Options section. Select Print in
Grayscale.
●
In the Mac OS X Print dialog: go to the Color Options panel and select Grayscale from the Mode drop-
down list.
●
On the Embedded Web Server's Submit Job page: select Color, then set Color/Grayscale to Print In
Grayscale.
You can adjust the gray balance of your print under Windows:
●
In the Windows driver dialog: select the Color tab, ensure that the Advanced color adjustments box is
checked, then press the Settings button beside it.
You can then make adjustments using separate controls for highlights, midtones, and shadows.
76 Chapter 10 Color management ENWW
To Next Page
Loading...
