to print. You can select color strips from more than one PANTONE stock. When you have selected all the
colors you want, press the Next button. The next window displays your selection; you can press Print to print
that selection, or Back to change the selection.
Color management from the front panel
You can color-calibrate the loaded paper type from the front panel by pressing , then , then Image
quality maintenance > Calibrate color. See
Color calibration on page 73.
The other color options in the front panel can all be found by pressing
, then , then Setup >
Printing preferences > Color options.
NOTE: These front panel settings can all be overridden by the printer driver or Embedded Web Server job
submission settings.
All jobs
●
Color/Grayscale: you can choose to print in color or in shades of gray. Default: Print in color.
●
Select RGB source profile: you can choose from a selection of RGB source profiles recognized by the
printer. Default: sRGB (HP).
●
Emulate printer: you can choose to emulate a different HP Designjet printer. Default: Off (no printer
emulation).
TIP: If you have old HP-GL/2 or PostScript files made for a different HP Designjet printer, you can send
them to the printer and use the front panel to turn on the appropriate emulation mode.
PostScript and PDF jobs only
●
Select CMYK source profile: you can choose from a selection of CMYK source profiles recognized by the
printer. Default: US Coated SWOP v2.
●
Select rendering intent: you can select the rendering intent. Default: Perceptual.
ENWW Color management from the front panel 81
To Next Page
Loading...
