324 Chapter 8 Removal & Installation
Removal & Installation
APS Assembly
Removal
1. Remove the Left Cover
⇒
See page 264
.
2. Remove:
• The Left Connector Cover or the 42-inch model
⇒
See page 287
.
• The Electronics Module Extension the 60-inch model
⇒
See page 288
.
3. Remove the Scan-Axis Motor
⇒
See page 346
.
4. Remove the Left Spittoon
⇒
See page 328
.
5. Remove the ISS
⇒
See page 321.
6. Disconnect the APS 1 (Top unit) valve electrical
connectors from the PCA.
7. Unclip the APS 1 electrical cables from the cable
clamps in the left connector panel
WARNING!: Switch off the printer and remove the power cable.
To Next Page
Loading...