how do I copy thick media?
djcc-6.htm[28/10/2014 15:50:01]
5. Select the Scanner button.
6. Select the Extended Thickness button.
7. Check the box labeled Use extended thickness paper handling.
8. Change the value for each of the scanner's cameras —
normally, only positive values should be used.
9. Make test scans and readjust the values until you are satisfied
that the lines are stitched correctly.
10. Click OK to accept your settings.
11. Repeat the above steps until you are satisfied with the results.
printing instructions legal information
© 2002-2014 Hewlett-Packard Company
To Next Page
Loading...
