Printer hardware issues
Close cartridge access door
●
Cartridge door must be closed to begin printing.
The printer shuts down unexpectedly
●
Check the power and power connections.
●
Make sure the power cord of the printer is connected rmly to a functioning power outlet.
NOTE: When Auto-O is enabled, the printer will automatically turn o after two hours of inactivity to help
reduce energy use. For more information, see Auto-O on page 24.
Resolve printer failure
●
Turn the printer o, then on. If that does not resolve the problem, contact HP.
ENWW Printer hardware issues 95
To Next Page
Loading...