Connect your printer to your computer with a USB cable (non-
wireless connection)
The printer supports a rear USB 2.0 High Speed port for connection to a computer.
To connect the printer with the USB cable
1. Visit 123.hp.com to download and install the printer software.
NOTE: Do not connect the USB cable to the printer until you are prompted to do so.
2. Follow the onscreen instructions. When you are prompted, connect the printer to the computer by
selecting USB on the Connection Options screen.
3. Follow the onscreen instructions.
If the printer software has been installed, the printer will operate as a plug-and-play device.
ENWW Connect your printer to your computer with a USB cable (non-wireless connection) 69
To Next Page
Loading...