Status Description
The Wireless light blinks fast for three seconds and then turns
o. At the same time, the Wireless icon and the Wireless
Attention icon on the display blink fast for three seconds and
then turn o.
The wireless capability of the printer is disabled.
Change the wireless settings. For more information, see
Wireless settings on page 68.
During the wireless setup, the Wireless light is blinking, the
Wireless icon and Wireless Attention icon are on, and the
signal bars are cycling.
There is no wireless signal.
–
Make sure your wireless router or access point is
powered on.
–
Move the printer closer to the wireless router.
The Wireless light is blinking, the Wireless icon is on, and the
Wireless Attention icon is blinking in sync with the Wireless
light.
One of the following might have occurred.
–
The printer has a problem connecting to the wireless
network.
–
An error occurs or an overlap session is detected when
using WPS.
Press the Wireless button ( ) and the Information button
( ) together to run the wireless test, and then review the
test report for information on how to solve the problem.
ENWW Control panel lights and display icons status 9
To Next Page
Loading...