Tips for working with cartridges
Use the following tips to work with cartridges:
●
To protect the cartridges from drying out, always turn the printer o using the Power button, and wait
until the Power button light goes out.
●
Do not open or untape cartridges until you are ready to install them. Leaving tape on the cartridges
reduces ink evaporation.
●
Insert the cartridges into the correct slots. Match the color and icon of each cartridge to the color and
icon for each slot. Make sure the cartridges snap into place.
●
Align the printer for best print quality. See Printing issues on page 76 for more information.
●
When the Estimated Cartridge Levels screen shows one or both cartridges in a low state, consider
getting replacement cartridges to avoid possible printing delays. You do not need to replace the
cartridges until print quality becomes unacceptable. See Replace cartridges on page 50 for more
information.
●
If you remove a cartridge from the printer for any reason, try to replace it again as soon as possible.
Outside of the printer, if unprotected, cartridges begin to dry out.
54 Chapter 6 Manage cartridges ENWW
To Next Page
Loading...