Control panel features
Overview of buttons and lights
Feature Description
1 Control panel display : Indicates number of copies, media errors, wireless status and signal strength, Wi-Fi
Direct status, and ink levels.
2 Information button: Prints out a printer information page. Press the button in combination with the
Wireless button, or the Wi-Fi Direct button to get more specic help pages tied to each of these buttons.
3 Resume button: Resumes a job after a disruption (for example, after loading paper or clearing a paper jam).
Resume light: Indicates the printer is in a warning or error state. For more information, see Control panel
error codes and status on page 89.
4 Cancel button: Stops the current operation.
5 Wireless button: Turns on or o the printer wireless capabilities.
Wireless light: Indicates whether the printer is connected to a wireless network.
6 Start Copy Color button: Starts a color copy job. To increase the number of color copies, press the button
multiple times fast.
7 Start Copy light: A blinking light indicates the Start Copy Color and Start Copy Black buttons are ready for
use.
8 Start Copy Black button: Starts a black-and-white copy job. To increase the number of black-and-white
copies, press the button multiple times fast.
9 Ink Alert light: Indicates low ink or cartridge problems. For more information, see Control panel error codes
and status on page 89.
ENWW Control panel features 5
To Next Page
Loading...