DeskJet 710C/712C
HP Parts Reference Guide™
www.h
.com/
o/h
arts
Print Mechanism Parts
Latch
205
C4557-40042 Plastic latch (Y-shaped) - Used in conjuction with the knob to hold the rear paper cleanout door assy in place
206
C4557-60045 Cartridge latch (Black) - Holds black ink cartridge in place
NO LONGER SUPPLIED
207
C4557-60046 Cartridge latch (Color) - Holds color ink cartridge in place
Lever
208
C4557-00037 Pressure plate lever - Transfers upward pressure from the separator lifter to the kicker
209
C5870-40022 Paper pusher - Small, spring loaded lever attached to pivot - Pushes against left side of paper to maintain right edge
alignment
Lifter
210
C4557-40063 Separator lifter - Used to lift the separator peg
Link
211
C6429-60025 Kicker bar cam link (Spring loaded)
Motor
212
C4557-60003 Carriage motor assembly (Includes pulley)
213
C6409-60004 Paper advance motor
Paper Stacker
214
C4557-40016 Kicker - Restacks paper in stack after top sheet is picked
Pin
215
C4557-40085 Link pin - Small plastic piece
C6429-60025 New Part for C4557-40085
216
C5870-40029 Separator peg
Plate
217
C6409-40028 Belt Attachment Plate - Mounted to back of Ink Cartridge Carriage Assembly - Used to attach the Carriage Drive Belt
Print Mechanism
218
C5870-69080 Print mechanism assembly - Complete mechanism with carriage movement, paper picking and service station
operations
NO LONGER SUPPLIED
Retainer
219
C4557-00024 Ferrite retainer - Holds head drive flex cable ferrite
220
C4557-20026 Felt retainer - Holds the lubricating felt to the side of the carriage
Rod
221
C6409-20004 Carriage rod - Shaft that the carriage assembly rides on - This item should be replaced only by trained, experienced
service personnel
Roller
222
C4557-20002 Pinch roller - Provides downward pressure on media as it passes by upper paper guide
223
C4557-40015 Rear roller (Black) - Between paper and rear paper guide
NO LONGER SUPPLIED
224
C4557-60025 Pivot feed roller - Shaft with 4 hard rollers - Does not include other items such as gear or encoder
225
C5870-40030 Postscan roller - Shaft with 2 rollers - Mounts on underside of the lower ADF chassis
226
C5870-60092 Pickup roller assembly - Shaft with large rollers, gear, and 2 bearings - Picks paper from paper input tray - Available for
trade sales in Europe and Asia/Pacific - Available for authorized service centers only in USA
227
C6409-60037 Pivot feed roller assembly - Shaft with small rollers and paper encoder - This item should be replaced only by trained,
experienced service personnel
228
C6426-60049 Pickup roller - Shaft with large rollers - Does not include other items such as gear or bearings
To Next Page
Loading...