IF YOU HAVE WINDOWS 3.1X
1 Insert the CD-ROM or disk 1 into your computer’s drive.
2 In the Program Manager, click File, and then click Run.
3 Type the letter of the computer’s drive (usually D:\, A:\, or
B:\), type SETUP, and click OK.
4 Follow the directions on the computer screen.
If you’re not sure how to answer a question that appears
on the screen, just press ENTER to accept the most
common settings.
5 When the installation is done, take the disk out of your
computer and restart Windows.
Store your disks in a safe, cool, dry place.
IF YOU’RE PRINTING FROM DOS
See “Printing from DOS” in Chapter 5 of the user’s guide for instructions.
SetupGuide Page 12 Friday, July 25, 1997 1:13 PM
To Next Page
Loading...