Connect Your
Printer to Your
Computer
1
Make sure the computer is turned off.
2
Lift the cable access door on the back of the printer.
3
Plug the end of the cable with the notches into the
printer. Snap both clips into the notches.
4
Plug the other end into the computer, and tighten
the screws.
Cable access door
STEP
2
You’ll need to buy
a printer cable that
supports bidirectional
communication (IEEE
1284-compliant), such
as HP C2950A.
SetupGuide Page 4 Friday, July 25, 1997 1:13 PM
To Next Page
Loading...