38
What If
YOU GET A
MESSAGE THAT
SAYS YOU’RE OUT
OF PAPER, BUT
YOU’RE NOT
You might not have
pushed the paper-
length adjuster in
all the way. Make
sure it’s snug against
the paper, and try
printing again.
T
HE TEXT IS FUZZY
AFTER PRINTING
A BANNER
If the print quality
seems especially
poor when you
switch from banner
printing, you might
have forgotten to
reset the printer for
normal printing.
9 After your banner is printed, if the Resume light is blinking, press the
Resume button as many times as needed until all the banner paper
is out of the printer.
■ Click
Cut-Sheet
in the HP print settings box.
■ Flip the banner switch down so that the light goes off.
■ Put paper in the IN drawer.
Resume button
AFTER PRINTING
To Next Page
Loading...