HP Dl180 - G6 E5504 2X2gb 4Lff Svr - Page 73

Connectors, switches, and LEDs 73
Item Designator Description
12 SATA5 SATA 5 connector
13 SATA3 SATA 3 connector
14 SATA1 SATA 1 connector
15 SATA2 SATA 2 connector
16 J33 18-pin front panel I/O connector
17 J35 5-pin system fan connector
18 J22 5-pin system fan connector
19 J37 Internal USB 2.0 tape header
20 SATA4 SATA 4 connector
21 SATA6 SATA 6 connector
22 J40 5-pin CPU fan connector
23 Heat sink
24 J38 8-pin power connector
25 J34 5-pin CPU fan connector
26 J30 5 pin CPU 1 socket
27 J31 5 pin CPU 0 socket
28 J28 5-pin CPU fan connector
29 J27 5-pin CPU fan connector
30 J26 RPS connector
31 J23 24-pin power connector
32 J4 5-pin system fan connector
33 J13 4-pin power connector
34 J14-J19 DIMM slots
Jumpers –boot block, board ID and chassis ID
The boot block (JP4) jumper, board ID (JP5, JP6)and chassis ID (JP7, JP8) jumpers. Table 6describes
the jumper settings.
Table 6
System configuration switch settings
Jumper Status
JP4 Open (default)
Short
JP5,JP6 Open
Short (default)