Diagnostic tools and setup utilities 85
Use this menu to set the system time and date, and configure the following items:
• View BIOS build date and version.
• View CPU type / CPU speed /CPU physical count information.
• View System memory size.
• View System serial number.
• View MAC address for the embedded NIC.
• Set Server Asset Tag.
• Set system time and date.
• Set boot features:
○ Enable or Disable Quick Boot.
○ Enable or Disable Bootup Num-Lock.
○ Enable or Disable Wake-On
○ Enable or Disable Wake-On Ring
○ Set restore on AC power loss options, such as last state, power off, and power on.
○ If BIOS displays an error message, set POST F1 Prompt for selections, such as delayed,
enabled, or disabled.
Advanced menu
Figure 77 Advanced menu of the BIOS Setup Utility 1
WARNING: Incorrect settings may cause the server to malfunction. To correct the settings, press F9
key to restore the default settings.
• CPU Configuration --- Configure and view the current CPU configuration and settings.
• Harddisk Configuration --- Select options for the Harddisk Configuration Settings.
To Next Page
Loading...
