Rear Components
Component Function
1
USB 3.0 Downstream
Connectors (side panel)
Connects optional USB devices to the monitor.
2
Master Power Switch Turns off all power to the monitor.
NOTE: Putting the switch in the Off position will yield the
lowest power state for the monitor when not in use.
3
AC Power Connector Connects the AC power cord to the monitor.
4
Digital Audio Out Connects a digital audio component to the monitor.
5
Analog Audio Out Connects headphones or optional HP Speaker Bar to the
monitor.
6
DisplayPort 1 Connects a DisplayPort cable to the monitor.
7
HDMI Connects an HDMI cable to the monitor.
8
DisplayPort 2 Connects a DisplayPort cable to the monitor.
9
RJ-45 Network
Connector
Connects a network cable to the monitor.
10
DreamColor USB 2.0
Ports
Connects a color calibration instrument or a USB flash
drive for color calibration or firmware update.
11
USB 3.0 Upstream Port Connects the USB hub cable to the monitor's USB hub
connector and to a host USB port/hub.
12
USB 3.0 Downstream
Ports
Connects optional USB devices to the monitor.
Rear Components 7
To Next Page
Loading...
