HP DreamColor Z27x - Image Adjustment Menu; Video Input Menu

Level 1 Level 2 Level 3 Level 4
●
Name of White Point
(ex. D65)
Gamma (x.x or sRGB)
Switch coordinate display to
xy/u'v' (allows you to switch
the information to display as
either CIE 1931 xy or CIE
1976 u'v')
Back
Reset to Last Calibration
Reset to Factory Calibration
Back
Video Input Menu
Level 1 Level 2 Level 3 Level 4
Video Input DisplayPort 1
DisplayPort 2
HDMI
Auto-Switch Source Enable
Disable
Back
Back
Image Adjustment Menu
Level 1 Level 2 Level 3 Level 4
Image Adjustment Aspect Ratio Display Fill to Source Aspect Ratio
(Proportional)
Fill to Entire Screen (Non-
Proportional)
Fill to Screen Width
(Proportional)
Fill to Screen Height (Non-
Proportional)
Pixel-for-Pixel
Digital Cinema Options
Image Region:
Show Entire DCI Container
Crop to DCI 1.85:1 Aspect
Ratio
Using the On-Screen Display Menu 43