HP dx2200 - Microtower PC Utility Guide

IRQ Resources
●
IRQ-3 assigned to
●
IRQ-4 assigned to
●
IRQ-5 assigned to
●
IRQ-7 assigned to
●
IRQ-10 assigned to
●
IRQ-11assigned to
●
IRQ-14 assigned to
●
IRQ-15 assigned to
When resources are controlled manually, allows you to assign each system interrupt a type,
depending on the type of device using the interrupt.
Legacy ISA for devices compliant with the original PC AT bus specification, PCI/ISA PnP for devices
compliant with the Plug-and-Play standard whether designed for PCI or ISA bus architecture.
Maximum Payload Size Allows you to set TLP payload size for the PCI Express Devices to (in bytes):
●
128
●
256
●
512
●
1024
●
2048
●
4096
Computer Setup—PC Health Status
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 9 Computer Setup—PC Health Status
Option Description
System Fan Fail Check Disables/enables system fan detection during POST.
Smart Fan Function Disables/enables smart fan functionality.
Current CPU
Temperature
(view only)
Current System
Temperature
(view only)
Current CPU Fan
Speed
(view only)
Current System Fan
Speed
(view only)
Vcore (view only)
+12V (view only)
VCC5 (view only)
+3.3V (view only)
Table 8 Computer Setup—PnP/PCI Configurations (continued)
10 Computer Setup (F10) Utility ENWW

HP dx2200 - Microtower PC Specifications

General

Chipset	Intel 945G Express
Memory	Up to 4 GB DDR2 SDRAM
Graphics	Integrated Intel Graphics Media Accelerator 950
Audio	Integrated High Definition audio
Network	Integrated 10/100/1000 Ethernet
Front Ports	2 USB 2.0, headphone, microphone
Power Supply	300W
Processor	Intel Pentium 4 or Intel Celeron
Optical Drive	DVD-ROM
Expansion Slots	1 PCI Express x16, 3 PCI
Operating System	Windows XP Professional or FreeDOS
Rear Ports	4 USB 2.0, VGA, Ethernet, Line-in, Line-out, Microphone
Storage	SATA Hard Drive (capacity varies)
USB Ports	8 USB 2.0 (2 front, 4 rear, 2 internal)