Computer Setup—Standard CMOS Features
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3 Computer Setup—Standard CMOS Features
Option Description
Date (mm:dd:yy) Allows you to set system date.
Time (hh:mm:ss) Allows you to set system time.
PATA Controller Disables/enables PATA Controller.
PATA Channel 0 Master
PATA Channel 0 Slave
For each, if PATA HDD is used, allows you to:
●
run HDD self-test for selected channel:
●
SMART Status Check
●
HDD Short Self-Test
●
HDD Extended Self-Test
●
set PATA Ch 0 Master/Slave device details on selected channel to:
●
None
●
Auto
●
Manual
●
set access mode on selected channel to:
●
CHS (Cylinder-Head-Sector)
●
LBA (Logical Block Addressing)
●
Large
●
Auto
●
view:
●
Firmware Version
●
Capacity
●
Cylinder
●
Head
●
Precomp
●
Landing Zone
●
Sector
SATA Controller Disables/enables onboard SATA controller.
4 Computer Setup (F10) Utility ENWW
To Next Page
Loading...
