Primary Video Adapter Allows you to select the boot display device when more than 2 video options are offered by the
system:
●
Integrated (Onboard)
●
PCI-E
SATA Controller Mode If SATA Controller is enabled, allows you to set the mode to:
●
IDE
●
AHCI
●
RAID
SATA Controller Allows you to disable/enable the SATA Controller.
Onboard LAN Allows you to disable/enable onboard LAN controller.
Onboard LAN Boot
ROM
Allows you to disable/enable the boot ROM of the onboard LAN chip.
Onboard WLAN Allows you to disable/enable onboard WLAN controller.
Onboard 1394 Allows you to enable/disable all 1394 ports.
Supervisor Password Allows you to establish, disable, or change the supervisor password.
User Password Allows you to establish, disable, or change the user password.
NOTE: Only displays if a Supervisor password is set.
Onboard Audio Allows you to set the onboard audio to:
●
Auto
●
Disabled
●
Enabled
ESC:Boot Menu Allows you to enable/disable the option to press the Esc key to access the Boot menu during
computer startup.
F9:Diagnostics Allows you to enable/disable the option to press the F9 key to access the Diagnostics menu during
computer startup.
F10:Setup Allows you to enable/disable the option to press the F10 key to access the Setup menu during
computer startup.
F11:Recovery Allows you to enable/disable the option to press the F11 key to access the Recovery menu during
computer startup.
F12:Boot from LAN Allows you to enable/disable the option to press the F12 key to access the Boot from LAN option
during computer startup.
Computer Setup—Power
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3 Computer Setup—Power
Option Description
After AC Power Failure Allows you to select system restart behavior after power loss:
●
Stay Off
●
Power On
●
Auto
Table 2 Computer Setup—Advanced (continued)
ENWW Computer Setup (F10) Utilities 3
To Next Page
Loading...
