HP Elite x2 1011 G1 - System Unit; Technical Specifications

QuickSpecs
HP Elite x2 1011 G1
Technical Specifications
Not all configuration components are available in all regions/countries.
c04507222 – DA – 15130 — Worldwide - Version 9 –January 20, 2016
Page 17
SYSTEM UNIT
Stand-Alone Power
Requirements (AC Power)
Nominal Operating
Voltage
19.5 V
Average Operating Power
13.6W
Max Operating Power
< 65 W
Temperature
Operating
32° to 95° F (0° to 35° C) (not writing optical)
41° to 95° F (5° to 35° C) (writing optical)
Non-operating
-4° to 140° F (-20° to 60° C)
Relative Humidity
Operating
10% to 90%, non-condensing
Non-operating
5% to 95%, 101.6° F (38.7° C) maximum wet bulb temperature
Shock
Operating
40 G, 2 ms, half-sine
Non-operating
240 G, 2 ms, half-sine
Random Vibration
Operating
1.043 grms
Non-operating
3.50 grms
Altitude (unpressurized)
Operating
-50 to 10,000 ft (-15.24 to 3,048 m)
Non-operating
-50 to 40,000 ft (-15.24 to 12,192 m)
DISPLAYS
11.6” diagonal LED-
backlit HD UWVA
Ultraslim (1366 x 768)
Outline Dimensions
(W x H x D)
27.05 x 15.95 x 0.25 cm
Active Area
25.6125 x 14.4 cm
Weight
170g (max)
Diagonal Size
11.6" in
Surface Treatment
Anti-glare
Contrast Ratio
800:1 (min)
Refresh Rate
60 Hz
Brightness
400 nit (typical)
Pixel Resolution
Format
1366 x 768 (HD)
Configuration
RGB Stripe
Interface
eDP 1.2
LCD Mode
IPS/FFS/VA
PPI
135 ppi
Viewing Angle
UWVA 85/85/85/85 (Left/Right/Down/Up)
11.6” diagonal LED-
backlit FHD UWVA
Ultraslim (1920 x 1080)
Outline Dimensions
(W x H x D)
27.05 x 15.95 x 0.25 cm
Active Area
25.632 x 14.418 cm
Weight
160g (max)
Diagonal Size
11.6 in
Surface Treatment
Anti-glare
Contrast Ratio
800:1 (min)