HP Elite x2 1011 G1 - Page 19

QuickSpecs
HP Elite x2 1011 G1
Technical Specifications
Not all configuration components are available in all regions/countries.
c04507222 – DA – 15130 — Worldwide - Version 9 –January 20, 2016
Page 19
Height
0.14 in (3.58 mm)
Width
0.87 in (22 mm)
Interface
SATA Gen 3 (6 Gb/s)
Performance
Maximum Sequential Read
Maximum Sequential Write
Up to 520 MB/s
Up to 300 MB/s
Logical Blocks
500,118,192
Operating Temperature
32° to 158°F (0° to 70°C) [ambient temp]
Features
ATA Security; ATA-8, SATA 3.0; DIPM; TRIM; DEVSLP
256 GB* M.2 Solid State
Opal 2 Drive
Drive Weight
10 grams
Capacity
256 GB
Height
0.14 in (3.58 mm)
Width
0.87 in (22 mm)
Interface
SATA Gen 3 (6 Gb/s)
Performance
Maximum Sequential Read
Maximum Sequential Write
Up to 520 MB/s
Up to 300 MB/s
Logical Blocks
500,118,192
Operating Temperature
32° to 158°F (0° to 70°C) [ambient temp]
Features
ATA Security; TCG OPAL 2.x; ATA-8, SATA 3.0; DIPM; TRIM; DEVSLP
512 GB* M.2 Solid State
Drive
Drive Weight
10 grams
Capacity
256 GB
Height
0.09 in (2.38 mm)
Width
0.87 in (22 mm)
Interface
SATA Gen 3 (6 Gb/s)
Performance
Maximum Sequential Read
Maximum Sequential Write
Up to 450 MB/s
Up to 400 MB/s
Logical Blocks
500,118,192
Operating Temperature
32° to 158°F (0° to 70°C) [ambient temp]
Features
ATA Security; ATA-8, SATA 3.0; DIPM; TRIM; DEVSLP
SECURITY
HP Fingerprint
Reader (On the Power
Keyboard)
Mobile Voltage Operation
3.0V-3.6V
Operating Temperature
14° – 167°F (-10° – 75°C)
Current Consumption
Image
36 mA peak
Low Latency Wait for
Finger
950 uA
Capture Rate
30 cm/sec
ESD Resistance
IEC 61000-4-2 4B (±15KV)