HP Elite x2 1011 G1 - Page 31

QuickSpecs
HP Elite x2 1011 G1
Technical Specifications
Not all configuration components are available in all regions/countries.
c04507222 – DA – 15130 — Worldwide - Version 9 –January 20, 2016
Page 31
Integrated Microphone
Yes, dual digital microphone array
Audio Output Quality
Frequency Response
20 Hz - 20 kHz
Signal to Noise Ratio
>85 dB
Total Harmonic
Distortion
0.01%
Noise Floor
-110 dB
Play/Record Sampling
Rate(s)
8 kHz - 48kHz
DAC
16, 20 or 24-bit
ADC
16 or 20-bit
Internal Stereo Speaker
Power Rating
1.5Watt
Impedance
8 ohms
POWER
HP 45W Smart AC Adapter
non-slim
Dimensions (H x W x D)
95.0 x 40.0 x 26.5mm
Input
90 to 265 VAC
Input Efficiency
88% min at 115 VAC / 89% min at 230VAC
Input frequency range
47 to 63 Hz
Input AC current
1.4 A at 90 VAC and maximum load
Output
Output power
45W
DC output
19.5V
Hold-up time
5 msec at 115 VAC input
Output current limit
<8A, Over voltage protection- 29V max
automatic shutdown
Connector
3 pin/non-grounded, mates with 4.5mm barrel type Smart ID DC connector
Environmental Design
Operating
temperature
32° to 95° F (0° to 35° C)
Non-operating (storage)
temperature
-4° to 121° F (-20° to 85° C)
Altitude
0 to 16,405 ft (0 to 5,000 m)
Humidity
0% to 95%
Storage Humidity
0% to 95%
EMI and Safety
Certifications
CE Mark - full compliance with LVD and EMC directives; Worldwide safety
standards - IEC60950, EN60950, UL60950, Class1, SELV; Agency approvals
- C-UL-US, NORDICS, DENAN, EN55022 Class B, FCC Class B, CISPR22 Class B,
CCC, NOM-1 NYCE; Reliability - failure rate of less than 0.1% annually within
the first three years of operation.
HP 45W Smart AC Adapter
non-slim 2 prong
Dimensions (H x W x D)
95.0 x 40.0 x 26.5mm
Input
90 to 265 VAC
Input Efficiency
88% min at 115 VAC / 89% min at 230VAC
Input frequency range
47 to 63 Hz
Input AC current
1.4 A at 90 VAC and maximum load
Output
Output power
45W
DC output
19.5V
Hold-up time
5 msec at 115 VAC input