5
Table 1. (Continued) Key features for F10 Setup on select 2009 HP business notebook PCs
Feature Function
Options (Default in Bold where
applicable)
Manage (create/delete/reset
password) the BIOS and Protect Tool
Users
•
Account
Creates additional BIOS user
accounts.
Administrator enters User ID
Privilege level. Password is set to
User ID by default, but can be
changed by user.
Allows to select various rules for a
BIOS password to qualify
•
Length
Allows administrator to specify the
minimum number of characters
required for an F10 power on
password.
32 maximum (8)
•
required
Allows administrator to require at
least one symbol, such as $,%,^,& or
# for an F10 power on password.
•
required
Allows administrator to require at
least one number, such as 1,2,3 or 4
for an F10 power on password.
•
character required
Allows administrator to require at
least one upper case character, such
as A,B,C or D for an F10 power on
password.
•
character required
Allows administrator to require at
least one upper case character, such
as a,b,c or d for an F10 power on
password.
•
Password?
Allows administrator to allow spaces
in an F10 power on password, such
as “New York”.
Allows users to establish a set of
failsafe questions in the event that the
power on password is lost or
forgotten.
SpareKey Enrollment
Allows administrator to specify if the
system should prompt users for HP
SpareKey enrollment during POST.
Fingerprint Reset on Reboot
(If Present)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
