9. If it is necessary to remove the display panel from the enclosure, remove the 4 Phillips PM2.0×3.0
screws that secure the panel to the display enclosure, and then lift the top of the panel upward.
(HP 840 only) The raw display panel is available using spare part number 823950-001 for HD panels,
823951-001 for FHD panels, and 823952-001 for QHD panels.
(HP 850 only) The raw display panel is available using spare part number 824515-001 for HD panels,
824516-001 for FHD panels, and 824517-001 for UHD panels.
(HP ZBook 15u only) The raw display panel is available using spare part number 827869-001 for FHD
SVA panels, 827870-001 for FHD UVWA panels, and 827871-001 for UHD panels.
10. Rotate the display panel all the way over (1), disconnect the display cable from the rear of the panel (2),
and then remove the display panel from the enclosure.
11. If it is necessary to replace the display hinges, remove the 1 Phillips PM2.0×3.0 screw (1) that secure the
hinge covers to the display enclosure, and then remove the hinge covers (2).
Component replacement procedures 79
To Next Page
Loading...
